OTCO Light Limited

High quality product, professional service, being the core supplier in Car LED Light industry!

No Hyper Flickering Car Blinker Light Canbus LED Bulb 1156 Turn Signal Light

No Hyper Flickering Car Blinker Light Canbus LED Bulb 1156 Turn Signal Light Specification Voltage: 9~30V Power: 21W Lumen: 525LM Chip Type: COB LED Chip QTY per Light: 5pcs Lighting Color: Yellow + Red Warranty: 2 Years Available Connector: 1156, 7440 3156. Certificates: CE, Rosh, FCC, PSE...

Send Inquiry
Product Details

No Hyper Flickering Car Blinker Light Canbus LED Bulb 1156 Turn Signal Light
Specification
Voltage: 9~30V
Power: 21W
Lumen: 525LM
Chip Type: COB LED
Chip QTY per Light: 5pcs
Lighting Color: Yellow + Red
Warranty: 2 Years
Available Connector: 1156, 7440 3156.
Certificates: CE, Rosh, FCC, PSE

Product Features:
● Two in One Design: Turn Signal Light with Brake Light.
● 5 Sides Lighting design, 4 sides lighting around the bulb with Projector Lens on the top side.
● Anti-Flicker Design, No Hyper Flickering
● CANBUS Error free and EMC Design, No OBD Error Codes and no need the extra load resistors or flash relay.
● 3 Sockets available for choice: S25 1156, T20 7440 and T25 3156.
● Fit for all car brands and models.

This canbus led bulb 1156 is multifunctional, it is especially designed for turn signal light, brake light, blinker light, reversing light and DRL daytime running light. In this case, the canbus led bulb 1156 is used as turn signal light with brake light function.
 
The canbus 21W 1156 LED Bulb is 100% true EMC for all Russian cars. The led Bulb will also work properly with most vehicle's computer system without OBD Error Codes or Hyper Flickering.
 
Equipped with CK Compatible Anti-Flicker Ballast, the canbus led turn signal bulb has the perfect normal lighting performance without fast flashing or flickering. There is no need the load resistor or the flash relay for the turn signal brake light to prevent the hyper flash.

1.jpg

2.jpg


The turn signal led bulb works in any CANBUS application where the reverse bulbs are monitored. You will not get a Bulb Out Warning or flickering signal when used in any reverse light application on any vehicle.

3.jpg


The led bulb flashes yellow light at normal flickering frequency for turn signal, and it will lights strong red light for brake light.


Size is ensured by Universal Rubber Grommet Fitment, small size design fits any hole opening between 23mm~29mm.

Full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution.

Related Products
Inquiry